Digital inputs and outputs
Enhance the programming and monitoring capabilities of the SM15K and SM3300 series with the Digital I/O Interface module. The Inputs and Outputs (I/O) can be used in the following ways:
- Program and monitor the I/O via Ethernet commands.
- Use the I/O in combination with the power supply’s built-in sequencer, enabling hardware triggering of sequences. Effectively adding PLC behavior to the programmable power supply.
This pluggable module can be installed at any time, easily upgrading the power supply. The interface card enables Digital I/O to interact with external hardware. See the data sheets below for more information.
Features
- 8 digital inputs
- 8 digital outputs
- Monitoring and programming via Ethernet commands
- Interaction with sequencer
- Isolated from the output voltage, working voltage 1000 VDC
- Floating with respect to earth
- Easy to plug in by user on site
Functionalities
- Hardware triggering of sequences
- Interaction with other equipment
- Stand-alone automation
- For SM3300 and SM15K series only,
multiple INT MOD DIG per unit allowed - Installation in all slots possible
- Combination with other interfaces for SM3300 or SM15K series possible
Specifications
- 8 inputs Logic high: 2 - 30 V
- 8 Open Drain outputs: 0 - 30 V, max. 200 mA
- Insulation programming connector - internal circuits: 1000 VDC
- Operating temperature: -20 to +50 ºC
Standards
- Safety: EN 60950 / EN 61010
Dimensions and weight
- Width: 25 mm
- Height: 77 mm
- Depth: 77 mm
- Weight: 80 gr
Support items
Downloads
| Data sheets | Type/Format | Size |
|---|---|---|
| Data sheet Interfaces SM3300 series | 607.01 KB | |
| Data sheet Interfaces SM15K series | 521.36 KB |
| Product Manuals | Type/Format | Size |
|---|---|---|
| Manual Interfaces SM3300 series | 1.4 MB | |
| Manual Interfaces SM15K series | 1.49 MB |
| 3D drawings | Type/Format | Size |
|---|---|---|
| 3D drawings Interface modules | zip | 7.77 MB |